How To Troubleshoot Amana Dishwasher That Is Not Working?

Amana dishwashers are some of the best on the market. But, despite that, they can sometimes face problems that prevent them from working.

An Amana dishwasher will not work if it can’t turn on, won’t fill with water, or won’t drain its wastewater. Besides that, the machine might stop mid-cycle for no apparent reason, making it impossible for you to complete a wash cycle and clean your dishes.

This guide will walk you through the possibilities for why your Amana dishwasher isn’t working. You’ll also discover which parts need troubleshooting and what you can do to get them working again.

Why Is My Amana Dishwasher Not Working?

An Amana dishwasher can fail to work at different stages. For example, you might find that it won’t turn on, won’t fill, stop in the middle of a wash cycle, or won’t drain. 

A dishwasher that doesn’t work at any of those stages will prevent you from cleaning your kitchenware.

So, this part of the article will prepare you for all 4 possibilities by telling you what to check, what problem it’s facing, and how you can fix it.

Amana Dishwasher Won’t Turn On

What to check: When your Amana dishwasher won’t turn on, to begin with, you’ll have to check its incoming power supply. That encompasses the circuit breaker, the wall socket (if it has one), and the dishwasher’s power cord.

What’s the problem: A lack of incoming power will prevent your dishwasher from turning on and working. So, you must check every part of its power supply.

Firstly, check if the circuit breaker has tripped. An electrical fault like a power surge will cause that to happen. In that situation, the circuit breaker trips to cut the power and protect the dishwasher.

Meanwhile, if your dishwasher plugs into a wall socket, the problem could lie there. The socket could be faulty and not letting electricity flow normally.

Lastly, the dishwasher’s power cord could be damaged by tears, rips, or holes. That will also prevent the dishwasher from receiving power, even if the circuit breaker and wall socket are fine.

Connect with an Appliance Repair Tech

Click here to use the chatbox to speak with one of our technicians.
No in-home service calls. No appointments.

How to fix it: You can solve this problem by starting with the circuit breaker. If it has tripped, push it to the OFF position first, then back to the ON side.

Suppose you don’t have the necessary skills to safely work on a faulty wall socket. In that case, you must engage a qualified electrician to do it for you.

Lastly, damaged power cords can be replaced. For example, you can purchase a new Amana dishwasher cord to replace your damaged one.

Read: How To Unlock Locked GE Profile Dishwasher Control Panel?

Amana Dishwasher Won’t Fill

What to check: Another common issue that can prevent your Amana dishwasher from working is its inability to fill itself with water. Check the incoming water supply and the water inlet valve in that situation.

What’s the problem: Aside from electricity, your Amana dishwasher needs water to do its job. So, the first thing that can prevent it from getting that water is a lack of water through the water line.

For example, the water valve controlling the water line might be closed. Besides that, the water line might be bent or kinked too far, restricting water from flowing through.

That water line connects to the dishwasher’s water inlet valve. If there are no problems with the water line, the valve itself could be faulty, failing to let water into the dishwasher.

How to fix it: Start your troubleshooting at the water valve. First, ensure that it’s fully open to let water flow through. Then, inspect the line to resolve any bends and kinks in the hose.

That hose should be as straight as possible without any sharp bends that will restrict water flow.

Once you’re sure the water supply is free from any problems, inspect the water inlet valve. Check it for electrical continuity with a multimeter if you have one.

When you’ve confirmed that the valve is the problem, you’ll have to replace it with another one that works. Unfortunately, this part can’t be repaired or serviced once it goes bad.

Read: GE Profile Dishwasher Control Panel Problems And How To Troubleshoot Them?

Amana Dishwasher Stops Mid-Cycle

What to check: Your Amana will stop during a wash cycle for safety reasons. The only thing that can trigger that is the door latch.

The door latch doesn’t just help to keep the dishwasher door shut. It also has switches inside that signal to the dishwasher when the door is open or closed.

What’s the problem: Your dishwasher will stop mid-cycle if you open its door for any reason. So, if it happens without you touching the door, that means the door latch is faulty.

What’s happening is the faulty door latch is mistakenly signaling to the dishwasher that its door is open, even though it’s still shut tightly in reality.

How to fix it: When the switches in a door latch go bad, they can wreak havoc on the dishwasher and stop it from working. So, the most straightforward solution is to replace it with another one that works.

That way, the dishwasher can correctly sense when its door is open or closed and continue running normally.

Dishwasher Door Latch
$21 - 40
Buy on Amazon
We earn a commission if you click this link and make a purchase at no additional cost to you.

Read: GE Dishwasher – Lights Flashing And Beeping (What Causes That And How To Fix It?)

Amana Dishwasher Won’t Drain

What to check: An Amana dishwasher’s ability to fill with water is just as important as its ability to drain. The dishwasher can’t give you clean kitchenware whenever draining isn’t possible.

You must troubleshoot the drain pump and drain hose when this problem happens.

The drain pump is responsible for driving wastewater out of the dishwasher and into the drain hose. Then, the hose carries that water into your household plumbing to be disposed of.

What’s the problem: The problem preventing your Amana dishwasher from draining normally is a clog somewhere in the draining system. That clog could be in the drain pump, caused by food bits or foreign objects trapped inside the pump.

Besides that, there could also be a clog in the drain hose that prevents water from flowing away. 

When that happens, the water gets backed up into the dishwasher, preventing it from draining and working normally.

How to fix it: You must solve this problem by getting rid of the clog, whether it’s in the drain pump or the drain hose.

Cleaning the drain hose is simple, as you only have to detach it and flush it with water from both ends.

However, unclogging the drain pump can be pretty challenging. You might be able to remove any foreign object stuck inside or flush out some minor clogs.

Severe clogs or jams, however, can’t be fixed and will require a replacement pump instead.

Read: How To Troubleshoot And Reset GE Profile Dishwasher E1 Error Code?

Frequently Asked Questions (FAQs)

Here are a few more helpful questions for when your Amana dishwasher isn’t working:

How Do You Reset An Amana Dishwasher?

You can reset an Amana dishwasher by cycling its power. First, shut off the dishwasher’s power at the circuit breaker. Then, leave the appliance alone for at least a minute. Turning the machine back on will complete the reset process.

How Do I Find The Circuit Breaker For My Amana Dishwasher?

The Amana dishwasher’s circuit breaker is located in your home’s main electrical box. That could be in your basement or garage, where all the circuit breakers are grouped together.

Read: GE Dishwasher 888 Code. How To Fix It?

How Do I Know If My Dishwasher Drain Pump Is Clogged?

You’ll know the drain pump is clogged when your Amana dishwasher has dirty water it can’t get rid of. Sometimes, the clog will cause the drain pump to make loud noises when it turns on.

How Easy Is It To Fix A Dishwasher?

In most cases, your Amana dishwasher is easy enough to fix by yourself. However, major repairs or those that involve electrical work are always best left to the professionals.

How Do You Test A Dishwasher Fill Valve?

The best way to test a dishwasher fill valve is to use a multimeter and perform a continuity test. That test will immediately tell you whether or not the valve is still functioning. Protection Status