Why Dyson Humidifier Not Working? Troubleshooting Guide

Dyson humidifiers do an excellent job of creating a comfortable environment at home that’s not too dry. Still, it can experience a handful of common problems occasionally. To minimize downtime, you must know what those problems are and how to fix them in advance.

When a Dyson humidifier stops working, it’s likely because there’s a power supply issue or the unit is tilted and unbalanced. Besides that, you might find the unit doesn’t produce any mist like usual, strange gurgling and trickling noises come from within, and it doesn’t blow air as fast as it used to.

This guide will help you understand why these common problems will stop your Dyson humidifier from working and how you can fix them quickly.

Why Is My Dyson Humidifier Not Working?

Here are some must-know troubleshooting steps to take when your Dyson humidifier isn’t working, based on the common problems that might affect it:

Not Turning On

About this: A Dyson humidifier can’t do anything to make your room comfortable if it won’t turn on in the first place. That’s why your humidifier requires a reliable power supply so its components can function correctly.

What causes it: The first thing to troubleshoot when your Dyson humidifier doesn’t turn on is its incoming power supply. For example, the power cord could have suffered damage like rips and tears. Besides that, the cord might not be fully plugged into the back of the Dyson unit.

The same problem will also happen if the Dyson humidifier isn’t perfectly level. When the device senses that it’s tilting slightly, it will prevent itself from turning on. That’s a safety measure to stop it from damaging itself.

How to fix it: To get your Dyson humidifier working again, check that the power cord is in excellent condition. Replace the power cord if it’s not in ideal condition.

Then, ensure it’s plugged into the port at the humidifier’s rear. When the cord is plugged in correctly, you’ll see a small light turn on directly above it.

Lastly, place your humidifier on a perfectly flat surface. When the humidifier senses that it’s perfectly level, it’ll turn on normally.

Read: How To Fix Dyson Fan Noises? Troubleshooting Guide

Connect with an Appliance Repair Tech

Click here to use the chatbox to speak with one of our technicians.
No in-home service calls. No appointments.

Not Producing Mist

About this: The Dyson humidifier adds moisture to the air by converting water into a mist. That mist is typically visible in most conditions, so most people rely on that as an indicator that the device is working.

Still, there are situations when it seems like the Dyson humidifier isn’t producing mist at all. When that happens, it’s understandable to assume that the device has stopped functioning correctly.

What causes it: A lack of mist from your Dyson humidifier can signal that the device isn’t working correctly. So, the device could have been turned off, or it might have run out of water.

However, if the humidifier is working, but there’s still no mist, the problem is with its humidity and fan speed settings. 

More specifically, a humidity setting that’s too low or a fan speed that’s too high will cause you not to see any mist coming from your Dyson humidifier.

How to fix it: Firstly, check that your Dyson humidifier can turn on and that its water tank has been filled.

Once you’ve confirmed that the humidifier is turned on, adjust its humidity settings to 70% and choose the lowest fan speed settings.

The high humidity setting and low fan speed will ensure that the device produces a mist you can see without any problems.

Read: How To Reset Dyson Vacuum?

Strange Noises

About this: Dyson humidifiers are popular for a wide variety of reasons. One is that the device operates silently and doesn’t bother you while you sleep.

Despite that, there are a few noises that you’ll hear occasionally. For example, Dyson humidifiers can sometimes produce a soft gurgling and trickling noise from inside.

These noises are typically overlooked by most users. However, you’ll hear them if you’re close enough to the humidifier in a quiet room without much ambient noise.

What causes it: Firstly, your Dyson humidifier is working correctly. The tricking or gurgling noises you hear are not signs of a problem or malfunction.

These noises only happen when the Dyson humidifier is still brand new and out of the box. There’s likely some trapped air inside that’s being moved around. So, that noise happens as the device pumps water from the tank through the column to convert it into a mist.

How to fix it: You don’t have to do anything to fix this issue. Firstly, as mentioned earlier, gurgling and trickling noises are not signs that your Dyson humidifier is malfunctioning. The device is working normally, so you have nothing to worry about.

Secondly, the noise will go away as you continue using the humidifier. Typically, you’ll stop hearing any gurgling or trickling from your Dyson humidifier after using up a few tanks full of water.

Read: 5 Reasons Why Dyson’s Vacuum Suction Motor Is Not Working

Weak Airflow

About this: Aside from water, the Dyson humidifier requires smooth airflow to distribute moisture in its surrounding environment.

So, the unit draws air in from its surroundings and drives it through an air filter. Finally, the air passes through the body and goes out of the loop amplifier.

You can control the speed of that airflow through the remote control.

What causes it: When the airflow from your Dyson humidifier seems weak, check to ensure that the airspeed settings you’ve chosen are correct. For example, you might expect a strong airflow even though the settings are at their lowest.

If the settings are high, but there’s still limited airflow, that means parts of the Dyson humidifier are clogged with dust. 

The dust restricts airflow, causing the air to come out slowly.

How to fix it: This problem is solved by cleaning your Dyson humidifier thoroughly. Next, you’ll have to take apart the loop amplifier and any other removable parts.

Then, use a vacuum to remove loose dust trapped in or around the Dyson humidifier. You can then switch to using a gentle brush or cloth to get rid of any stubborn blockages around the unit.

Once air can flow in and through the Dyson humidifier without restrictions, smooth airflow will be restored, and the unit will work as you expect it to.

Read: 4 Reasons Why Dyson Vacuum Smells Bad

Frequently Asked Questions (FAQs)

Check out these additional questions to troubleshoot your Dyson humidifier:

How Do You Use A Dyson Air Humidifier?

A Dyson air humidifier works by plugging it into a power source and filling its water tank with distilled water only. Then, choose your desired humidity levels, and the device will continue working until it reaches them. Alternatively, you can use Auto Mode, in which the device will monitor humidity levels and only turn on when necessary.

Read: Dyson Vacuum Has No Power

Where Should A Humidifier Be Placed In A Room?

You can place your Dyson humidifier anywhere in your room where there’s a power source. However, keeping it 3 feet away from your bed is best. That way, the extra humidity will less likely bother your nose and throat as you sleep.

Will A Dyson Humidifier Work Without Water?

Yes, the Dyson humidifier will still work without water. However, you won’t benefit from its humidifying features. The fan will continue to blow air without adding humidity.

How Often Do You Have To Fill A Dyson Humidifier?

The water tank in a Dyson humidifier has a capacity of 1 gallon, which is enough to keep it supplied for 36 hours. So, you’ll have to fill a Dyson humidifier every 36 hours you run the device. If you leave the water unused for extended periods, you must empty the tank and freshen the water every two days.

What Can I Use To Clean My Dyson Humidifier?

You can use a vacuum to remove loose dirt in and around your Dyson humidifier. Alternatively, you can use a can of compressed air to blow away dirt and keep its airflow smooth.

DMCA.com Protection Status