How To Fix GE Ice Maker Leaking Water Into Bin?

GE ice makers are some of the best models, but they aren’t immune to problems. One such issue is when the ice maker leaks water into the bin, making a mess and leaving you with less ice than you need. So, how do you fix a GE ice maker leaking water into the bin?

Here’s how to fix GE ice maker leaking water into bin in 8 easy steps:

  1. Shut off the water supply to the ice maker.
  2. Unplug the ice maker from the power outlet.
  3. Drain the water from the ice maker by tipping it forward.
  4. Remove the screws that secure the back panel.
  5. Inspect the water inlet valve for cracks or leaks.
  6. Replace the water inlet valve if it’s damaged.
  7. Reconnect the back panel to the ice maker.
  8. Call a qualified appliance repair technician.

Do you have a GE ice maker leaking water into the bin? If so, don’t worry – you can fix it in just eight easy steps! Keep reading for all the information you need to get your ice maker back up and running like new.

1. Shut Off the Water Supply to the Ice Maker

If your GE ice maker is leaking water, you first need to shut off the water supply. This will prevent any further damage from occurring and will give you a chance to assess the situation.

Besides, if you don’t shut off the water, you’ll just be wasting water and making a bigger mess!

Tip: If you’re unsure how to shut off the water to your ice maker, don’t hesitate to check your owner’s manual.

Read: Why GE Ice Maker Squealing? – Troubleshooting Guide

2. Unplug the Ice Maker From the Power Outlet

Once the water is shut off, unplug the ice maker from the power outlet. This is a necessary safety precaution – you don’t want to be working on electrical appliances while they’re still plugged in.

Most GE ice makers have a simple design, and unplugging them from the power outlet is usually a straightforward process. Here’s how to do it:

  1. First, locate the power cord. It’ll be attached to the back of the ice maker.
  2. Next, find the power outlet. It’ll likely be on the wall near your GE ice maker.
  3. Then, switch off the power to the outlet by flipping the switch to the “off” position.
  4. Finally, unplug the cord from the outlet.

Note: If you can’t find the power outlet, your ice maker may be hardwired. In that case, you’ll need to shut off the breaker before proceeding.

Read: Why GE Refrigerator Leaks Water On Floor

Connect with an Appliance Repair Tech

Click here to use the chatbox to speak with one of our technicians.
No in-home service calls. No appointments.

3. Drain the Water From the Ice Maker by Tipping It Forward

Now it’s time to get rid of all that water that’s been leaking into the bin. The best way to do that is to tip the ice maker forward so the water can drain.

If you have a bucket or other container handy, you can place it underneath the ice maker to catch the water. Otherwise, just tip the ice maker over the sink.

Here are a few things to keep in mind as you tip the ice maker forward:

  • Be careful not to hit any nearby objects – you don’t want to damage your ice maker or anything else in your kitchen!
  • If your ice maker is particularly full of water, it might be helpful to use both hands to tilt it forward.
  • Once the ice maker is tipped forward, wait a few minutes for all of the water to drain.

4. Remove the Screws That Secure the Back Panel

Once all the water has been drained, it’s time to look at the water inlet valve. But first, you need to remove the ice maker’s back panel so you can access the valve.

Most GE ice makers have just a few screws holding the back panel in place. Use a screwdriver to remove those screws, and then set the panel aside.

Read: How To Stop Ice Maker From Making Noise – Helpful Tips

5. Inspect the Water Inlet Valve for Cracks or Leaks

Now that you have access to the water inlet valve, it’s time to inspect it for any cracks or leaks.

If you see any damage, the valve is likely the cause of your GE ice maker leaking water into the bin. In that case, you’ll need to replace it.

Besides the valve, here are a few other things you should inspect to determine the cause of the leak:

  • The water inlet valve solenoid: This is the part of the ice maker that controls the flow of water into the machine. If it’s damaged, it could be causing water to leak out.
  • The ice maker shut-off arm: The shut-off arm is what tells the ice maker when to stop making ice. If it’s defective, it could be causing water to leak.
  • The ice maker mold and assembly: If the assembly is cracked or warped, it could be causing water to leak out.

6. Replace the Water Inlet Valve if It’s Damaged

If the water inlet valve is damaged, you’ll need to replace it with a new one. Fortunately, this is a relatively straightforward process – you can find replacement valves at most hardware stores.

Alternatively, you can check if this GE Refrigerator Icemaker Water Valve from fits your unit. It’s an affordable option that’s compatible with many different GE ice maker models, making it a great choice if you’re not sure which valve to get.

Once you have the new valve, screw it into place and reattach the back panel of the ice maker.

That being said, here are a few guidelines for replacing the water inlet valve:

  • Be sure to get a suitable replacement valve. The best way to do that is to bring the old valve with you to the store so that you can compare it to the new one. If you’re ordering parts online, you can check the user manual for your GE ice maker to find the correct replacement valve.
  • Before attaching the new valve, clean the area around the hole where it will go. That way, you can be sure that the new valve will seal properly.

Note: The same step applies if your GE refrigerator’s water inlet valve is leaking. Here’s a YouTube video that may help in that regard:

7. Reconnect the Back Panel to the Ice Maker

Once you’ve replaced the water inlet valve (or if you didn’t need to replace it), it’s time to reattach the back panel of the ice maker. Here’s how to do that:

  1. First, line up the panel with the holes on the back of the ice maker.
  2. Then, use a screwdriver to screw the panel into place. Be sure not to overtighten the screws, as that could strip the holes or damage the panel.
  3. Finally, plug in the ice maker and turn on the water supply.

If everything is working correctly, your GE ice maker should start making ice without leaking into the bin.

Read: 3 Reasons Why Ice Maker Is Leaking Water On Floor

8. Call a Qualified Appliance Repair Technician

If your GE ice maker is still leaking water into the bin, it’s time to call a qualified appliance repair technician. They’ll diagnose the problem and make any necessary repairs.

Besides, they might inspect the entire ice maker to ensure that there are no other issues that could cause problems down the road. Still, they may give you tips on preventing the problem from happening again.

Read: Why Your Ice Maker Is Making Grinding Noises

Final Thoughts

A GE ice maker that’s leaking water into the bin is frustrating, but luckily, it can be fixed. The water inlet valve is usually the culprit, so inspecting it is the best course of action.

Remember, unless you’re confident in your ability to do the repair, it’s always best to call a professional. That way, you can be sure that the job is done right and that your ice maker will work properly for years to come. Protection Status