Follow this DIY guide to silencing the beeps on various Samsung microwaves. Troubleshoot the door switch and other issues.
Before you silence your microwave, there are some things you need to know about the beeping. A microwave beeping is its way of communicating with you. It isn’t always about your frozen dinner being ready either.
Microwaves beep to alert you to errors and failing parts. They alert you to its door being open and some over-the-range models will alert you when the temperature is too hot in the kitchen. Those are all safety features.
Pressing Stop to Silence Samsung Microwave
You can try pressing the stop or cancel button several times to see if it works, but most of the time it won’t if there is a problem with the interlock door switch.
Ways for how to silence a Samsung microwave depend on the model you have as each has its variations. For most, the “sound on/off” feature is found under the settings or options menu.
Root Problem: The Door Switch
The interlock door switch is probably the root issue of any problem with a microwave. It is also the primary cause of a microwave that beeps continuously.
Faulty door switches can also cause your microwave to have fan and light issues. It is usually advised that if you must replace one, you should replace all three.
Most microwaves have three switches. The one that is usually the culprit for most issues is the bottom one. However, it may serve you well to test all three of them.
Testing a Door Switch
You will need a multimeter to test the door switch. You will also need to unplug the microwave, pull it out, and do a partial disassembly to get to the door switches.
The door switches are near the control panel under the grill. You will need to remove the grill, unscrew several screws to get the control panel detached, and then a few more to disassemble the door switch.
You will see there are wires attached to the door switches. The final move is to disconnect them to remove them.
Once you get the switch out, you will have to test it with a multimeter. Attach the probes to the common and one of the other terminals to check for continuity. The meter should read either zero or close to it to show continuity.
Read: Microwave Blown Fuse Symptoms
Replacing a Door Switch
It isn’t hard to replace a faulty door switch once you’ve taken one out. You reverse course in putting the new one in. After you connect the wires and snap them into place, it’s just a matter of replacing and tightening screws.
The Cost of a Door Switch
A microwave door switch is one of the cheapest parts available. Most retail for around $40 but you can find some online for under $10, depending on your model. It is estimated to cost between $50 and $100 if you have a service center repair the appliance. That includes labor and parts.
There are some other options you can try before you start getting into the door switch assembly. The first thing to do is try to reset it.
Finding Hidden Functions to Silence Microwave
Those who try the muting instructions without success may have an appliance with hidden functions. These are rare for Samsung but you could have one.
The first thing to do is to look for a sound button. That is the easiest way to mute it and it would make it really simple. Sometimes, it may not be exactly where you think it should be.
You can try to hold down either 0 or 1. Many hidden functions are stored within these options. You can also try holding the stop or cancel button down. Sometimes, hidden functions are stored with these keys.
Be aware that sometimes holding some of these buttons could activate the child lock feature too. You will see a lock message or icon come up if it does. You can press the same button for three seconds to deactivate it.
If none of those options work, you can look at your owner’s manual or download a manual for your model from Samsung.
Related Read: How to Set the Clock on a Samsung Microwave?
How to Reset A Microwave?
There are two ways you can reset a microwave. The first way is to open and shut the door hard 10 times. That can reset the door switch so that it functions better.
The second way is to unplug the microwave. Wait a minute or two and plug it back in. All error codes will be cleared and the appliance will be reset. This will also reset the control panel and could resolve your continuous beeping problem.
Resetting the Sensor
Sometimes a sensor will detect that something is in the microwave oven when nothing is there and that will cause it to beep. You can reset the sensors with just a cup of water and some sugar.
Put some water and a quarter teaspoon of sugar in a cup. Put it in the microwave and put on cook for around 16 seconds. Open the door and take out the cup. Press the stop or clear.
Silencing Various Models
Samsung microwaves are different in some ways and there are things you can do to silence them, depending on the model. Using the silent mode means you won’t hear a beeper at all.
Sometimes, hitting the silent button and then resetting it to beep will correct the endless beeping.
Samsung MG11T5018CC
The beeper on this model can be switched off. To do that press both arrow buttons, which are the decrease and increase buttons at the same time. You can turn it back on again by pressing those buttons again.
Samsung ME18H704SFS
Press down on the options button. You will press the number 3 button to get to the sound options. Pressing number 2 will turn off the sound. Pressing number 1 will turn it back on.
Confirm your choice by pressing the enter/start button. This sets your choice. Go through the process again to change your choice.
Samsung MS14K6000As/A MS14K6000 Samsung MG11H2020CT
You can mute the sound on this model by pressing the sound button until the word “off” appears on the display. Press the start button to confirm your change.
If you want to turn the sound back on, press the sound button again until the word “on” appears on the display. Press the start button to confirm your choice.
How do you change the chime on a Samsung microwave?
Every model is different, but you start by pressing the options button. Then, press down 7 on the number pad to adjust the sound settings.
Why does my microwave beep randomly?
A microwave beeping randomly indicates that something is going on with the onboard computer. Doing a hard reset should get the computer back into sync.
A hard reset is done by unplugging the microwave, waiting a couple of minutes, and then plugging it back in. If the problem continues, you will either need to replace the control board or one of the three door interlock switches.
Can I silence my microwave if I don’t have a sound button?
Yes, you can mute your microwave even if there isn’t a specific sound button on it.
Hold down the “0” button and see what comes up. You can also try the “1” or the “stop” button. The “cancel” button may work also to help you get to the secret function.
Often, these buttons have hidden functions that manufacturers program into the appliance that you never know about. You can scroll through the functions to find the sound feature and turn it to mute.
Read: 5 Reasons Why Microwave Is Sparking Inside
Is there an easy way to stop the beeping?
One of the simplest tricks is to press the start and stop buttons at the same time. Sometimes, that will do a reset of the control board. You can also try opening and closing the door again, hard. That can reset the door interlock switch.
How do I get my microwave to beep again?
If your microwave stopped beeping, try unplugging it and plugging it back in again after a few minutes. You may also want to check the sound feature to see if it has somehow been switched off.
Can the sound go back on a Samsung microwave?
No, the sound doesn’t have a fuse to go bad. Usually, sound issues such as beeping constantly or not beeping at all are related to either the door switch or the control panel. Sometimes, features and relays on the control panel can wear out.
Check the Warranty
Those who have a newer microwave should check the warranty before trying to fix the appliance yourself or taking it to a service center. A warranty would cover such a repair. Once you determine it’s under warranty, call the Samsung Support Center to find out where to send or take your appliance.
Related Read: Troubleshooting Samsung Microwave Error Codes
Connect with an Appliance Repair Tech
Click here to use the chatbox to speak with one of our technicians.
No in-home service calls. No appointments.
