How To Fix AMANA Dishwasher That Is Leaking? Troubleshooting Guide

A leaking Amana dishwasher is a cause for concern. Even though the machine will continue cleaning your dishes, a leak can cause your kitchen floor to get flooded pretty quickly. So, putting your dishwashing on hold is best until you can troubleshoot the problem.

Amana dishwashers will leak from two places. First, leaks around the door are caused by excess sudsing inside or a door gasket that’s no longer working correctly. The gasket is likely worn-out or damaged. Meanwhile, a leak from underneath the appliance is caused by damaged hoses or loose hose connections.

It’s easier to troubleshoot your leaking Amana dishwasher when you understand where the water is coming from. So, this guide will help you troubleshoot leaks from the door and leaks from underneath the appliance.

Why Is My Amana Dishwasher Leaking From The Door?

Pay close attention to where the leaking water comes from in your Amana dishwasher. If it comes from any section of the door, these are the reasons:

Too Many Suds Inside

About This: Suds are the frothy bubbles produced by your dishwashing detergent. When your dishwasher begins a new cleaning cycle, it’ll mix detergent with water and spray it onto your dishes.

Simultaneously, the mixture will combine air into itself, producing suds.

A small amount of suds is expected when you use the correct amount of dishwashing detergent. However, too much detergent will result in excess suds, which are problematic.

The Problem: The first reason your Amana dishwasher leaks from the door is that there are too many suds inside. 

That will happen when too much dishwashing detergent is released into the wash cycle, and there isn’t enough water to wash it away.

Some excess suds will leak out of the dishwasher door and pull some water along with it, dripping onto your kitchen floor.

The Solution: Firstly, you can prevent this problem from ever happening again by using only the recommended amount of dishwashing detergent. Your detergent will provide that information on the packaging, telling you the precise amount to use in each wash.

Connect with an Appliance Repair Tech

Click here to use the chatbox to speak with one of our technicians.
No in-home service calls. No appointments.

Meanwhile, you can clean out the excess suds in your dishwasher by running an empty cycle. The water can wash and drain the frothy soap bubbles and clear your dishwasher compartment.

Read: How To Unlock Locked GE Profile Dishwasher Control Panel?

Door Gasket Or Seal Issue

About This: Your Amana dishwasher door has a gasket that goes all around its edges. That gasket ensures that a tight seal is formed whenever you shut the appliance’s door.

With a tight seal, no splashing water or detergent inside can leak through the door.

The Problem: A tight seal at the dishwasher door is only possible when the gasket is in excellent condition. So when you find water leaking through the door, that’s a sign that the door gasket is worn-out or damaged.

Inspect the door gasket, and you’ll find that it has tears, rips, holes, or the entire gasket has become warped with time.

Any of those conditions will prevent the gasket from keeping water inside the dishwasher’s compartment.

The Solution: Once you’re sure that the door gasket is to blame, you’ll have to replace it with a brand-new one. That’s because gaskets or seals can’t be repaired, and the leaking will continue until you replace the damaged part.

Read: GE Profile Dishwasher Control Panel Problems And How To Troubleshoot Them?

Why Is My Amana Dishwasher Leaking From Underneath?

A leak coming from underneath your Amana dishwasher unit points to different possible causes. Those are:

Loose Hose Connections

About This: Your dishwasher relies on several hoses to carry water to where it’s needed. For example, water inlet hoses carry clean water into the appliance. Then, the drain hose carries used water towards your drain.

These hoses are separate from one another, so they form many connections with other components. Those connections are kept tight with clamps to ensure that the hoses don’t come loose and water doesn’t leak out.

The Problem: The problem causing your Amana dishwasher to leak from underneath is one or more loose hose connections.

Remember: the hoses are kept in place with clamps wrapped tightly around them. Unfortunately, vibrations and incorrect installations can cause them to come loose eventually.

As a result, water from the affected hose will fall to the bottom of the dishwasher, eventually pooling and spreading out onto your kitchen floor.

The Solution: Firstly, you’ll have to inspect all the dishwasher’s hoses. The goal here is to find the affected hose and tighten its connections.

Meanwhile, you should also inspect all the other connections to ensure they’re still tight as well. That way, you won’t have to deal with another leak anytime soon.

Read: GE Dishwasher – Lights Flashing And Beeping (What Causes That And How To Fix It?)

Damaged Water Inlet Or Drain Line

The Problem: As you saw above, several hoses are underneath your Amana dishwasher. Some are for carrying clean water (the water inlet hose), while others help to remove wastewater (the drain line).

When any of those hoses suffer damage like rips, tears, or holes, they will leak water directly to the floor underneath your appliance.

That kind of damage to the water inlet or drain line could happen due to excessive wear or damage during transportation. It’s also possible that they were accidentally damaged during a recent repair if you’ve just had one done on the machine.

The Solution: When you suspect that the hoses are damaged, you’ll have to inspect them closely to be sure. That way, you’ll know which hose is affected and whether or not more than one needs your attention.

Patching the damaged hose is only a short-term solution and is, therefore, not worth it in the long run.

Instead, the better long-term solution is for you to replace the hose entirely.

That way, you can rest assured that the leak won’t happen again anytime soon.

Read: How To Troubleshoot And Reset GE Profile Dishwasher E1 Error Code?

Frequently Asked Questions (FAQs)

Here are a few more questions and answers to help you troubleshoot your leaking Amana dishwasher:

Do Excess Suds Damage A Dishwasher?

Yes, too many suds can damage a dishwasher. That’s because the suds will bring moisture to parts of the machine where it doesn’t belong, such as its electronic components and motors. If the sudsing problem is too severe, those components will be damaged, leading to expensive repairs.

Can You Clean An Amana Dishwasher With Vinegar?

Yes, you can clean an Amana dishwasher with vinegar. That’s an effective method to clear out excess sudsing inside the appliance. Pour some white vinegar into a shallow bowl and place it on the top right of the dishwasher. Then, run a complete wash cycle without any detergent or dishes inside.

Read: Why LG Dishwasher Beeping When Door Is Open?

What Causes Water To Back Up In The Dishwasher?

Water will back up into your dishwasher when the drain hose is clogged. As a result, the water that flows into your dishwasher has nowhere to go, so it builds up inside the compartment. Once the water’s level gets too high, it’ll leak out from around the door.

Can You Replace The Gasket On A Dishwasher?

Yes, you can replace a gasket on your Amana dishwasher yourself. You’ll first have to order a replacement compatible with your exact dishwasher model to ensure it’ll fit correctly. Then, remove the existing gasket and attach the new one. Doing so will prevent any leaks from happening.

Is A Dishwasher Seal The Same As A Gasket?

The terms ‘seal’ and ‘gasket’ are often used interchangeably. However, there is a technical difference. Seals are often used on moving parts, while gaskets are used on flat surfaces between components that don’t move. Both of them have the same job, however, to maintain a tight seal and prevent leaks. Protection Status